Huawei UPS5000-E-400K Series User Manual page 135

UPS5000-E-(400 kVA-600 kVA)
User Manual (60 kVA Power Modules)
Item
MUE06A connection
MUS05A DO_1 Action,
MUS05A DO_2 Action,
MUS05A DO_3 Action,
MUS05A DO_4 Action
MUE07A DO_1 Action,
MUE07A DO_2 Action,
MUE07A DO_3 Action,
MUE07A DO_4 Action,
MUE07A DO_5 Action
MUS05A DO_1, MUS05A
DO_2, MUS05A DO_3,
MUS05A DO_4
MUE07A DO_1, MUE07A
DO_2, MUE07A DO_3,
MUE07A DO_4, MUE07A
DO_5
MUE07A DI_1, MUE07A DI_2,
MUE07A DI_3, MUE07A DI_4,
MUE07A DI_5
User Settings
Figure 4-33 User settings 1
Issue 05 (2019-12-24)
Description
parameter is displayed on the screen. Set this
parameter to determine whether the port is used to
detect the status of the PDU input surge protector, or
system output switch.
Specifies the MUE06A connection status. If this
parameter is set to Enable, the mains and bypass
backfeed protection is enabled.
Controls the status of DO ports on the MUS05A dry
contact card.
Controls the status of DO ports on the MUE07A
extended dry contact card.
Corresponds to the signal of the output dry contact DO
on the MUS05A.
Corresponds to the signal of the output dry contact DO
on the MUE07A.
Corresponds to the signal of the input dry contact DI
on the MUE07A.
Copyright © Huawei Technologies Co., Ltd.
4 User Interface
127