Installing Batteries - Huawei UPS5000-E-400K Series User Manual

UPS5000-E-(400 kVA-600 kVA)
User Manual (60 kVA Power Modules)
Figure 3-12 Mounting hole dimensions for the 600 kVA UPS (unit: mm)
Step 2 Drill cabinet mounting holes in channel steel by using a hammer drill.
Step 3 Use a pallet truck to move the cabinet to the installation position.
Step 4 Use common M12x60 bolts to secure the cabinets into the mounting holes in the channel steel
and tighten the bolts.
Step 5 Install the front, rear, left, and right anchor baffle plates.
----End

3.2.2 Installing Batteries

Context



Procedure
Step 1 Install a battery rack and batteries.
For details, see the battery installation guide delivered along with batteries.
----End
Issue 05 (2019-12-24)
Before installing batteries, read through the battery safety precautions, obtain the delivered
battery installation guide, and install batteries as instructed.
Place the batteries in a correct way to prevent vibrations and shocks.
Install the batteries from the lower layer to the upper layer to prevent falling over due to
imbalance.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
62