Installing An Ip21 Component - Huawei UPS5000-E-600K-SC User Manual

UPS5000-E-(600 kVA-800 kVA)
User Manual
Figure 3-83 Locking the antiseismic kits to the ground
Step 7 Reinstall the support baffle plates and rear covers in the cabinet.
Step 8 Install the front and rear anchor baffle plates and left and right anchor baffle plates, as shown
in Figure
----End

3.4.2 Installing an IP21 Component

Context
If the IP21 component is installed, you cannot route cables at the top of the cabinet.
Procedure
Step 1 Install leveling feet at the bottom of the IP21 component, with two long feet on the front and
two short feet at the rear, as shown in
Issue 02 (2016-01-20)
3-21.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 3-84.
3 Installation
114