Installation; Step 1 - Select A Location - Ultratec CAPTEL 200 Using Manual

INSTALLATION

CapTel includes the following parts:
✔ Handset with coiled cord
✔ AC adapter
✔
7-foot telephone line cord
✔
6-inch telephone line cord (use when mounting on wall)
✔
Desktop/wall footplate
CAUTION! Do not plug the CapTel into any telephone line other than a
standard, analog telephone line or an analog port. Connection to a digital
telephone line may damage the CapTel or the telephone system and will
void your warranty. You may connect to a Digital Subscriber Line (DSL) only
if there is an inline analog filter between the phone jack and the CapTel.
STEP 1 – Select a Location
The CapTel requires a standard (analog) telephone line like those in most
homes. If you are installing the CapTel in an office setting, check with the
telephone system administrator to make sure you are using an analog port
such as is used by some computer modems, some fax machines, or a direct-
connect text telephone (TTY).
Set up the CapTel in a place where:
✔ There is an electrical outlet nearby.
✔ There is a phone jack nearby.
✔ The surface it is set on, or mounted to, is stable and secure.
✔ The area is protected from excessive heat or humidity.
6 INSTALLATION
■