Ultratec CAPTEL 200 Using Manual page 18

Using Hold/Mute
During a Captioned Call (Mute)
Press the button during a captioned call to mute your voice and
HOLD
background sounds. Confirm that the red light above the button is
HOLD
lit. As long as this light is on, you can still hear what the person on the
other end of the line is saying and you will still see captions on the display.
However, the other person will not be able to hear you. When you are
ready to resume your conversation, press the button a second time.
HOLD
During a Non-Captioned Call (Hold)
Press the button during a non-captioned call to place the other
HOLD
person on hold. Confirm that the red light above the button is lit. As
HOLD
long as this light is on, the person on the other end of the line cannot hear
what you are saying and you cannot hear them. When you are ready to
resume your conversation, press the button a second time.
HOLD
You can also resume your conversation from another telephone on the
same line. This is done by hanging up the handset while the CapTel is on
hold, then picking up the handset of the second phone. The CapTel is
hung up automatically.
Using Flash (Non-Captioned Calls Only)
Some telephone service features like call-waiting or 3-Way Calling require a
"hook flash." The hook flash is a very brief interruption of the connection
like hanging up the phone for one second.
When using hook flash during a non-captioned conversation, press the
button. There is a brief click or silence on the line. If using call-
FLASH
waiting, the second call should now be connected.
NOTE: The Flash button should not be used during a captioned call.
16 USING CALLING FEATURES
■