Installation - Ultratec CapTel 200 User Manual

INSTALLATION

CapTel includes the following parts:
 Handset with coiled cord
 AC adapter
 7-foot telephone line cord
 6-inch telephone line cord (use when mounting on wall)
 Desktop/wall footplate
CAUTION! Do not plug the CapTel into any telephone line
other than a standard, analog telephone line or an analog
port. Connection to a digital telephone line may damage the
CapTel or the telephone system and will void your warranty.
You may connect to a Digital Subscriber Line (DSL) only if
there is an inline analog filter between the phone jack and
the CapTel.
STEP 1 – Select a Location
The CapTel requires a standard (analog) telephone line like
those in most homes. If you are installing the CapTel in an
office setting, check with the telephone system administrator to
make sure you are using an analog port such as is used by some
computer modems, some fax machines, or a direct-connect text
telephone (TTY).
Set up the CapTel in a place where:
 There is an electrical outlet nearby.
 There is a phone jack nearby.
 The surface it is set on, or mounted to, is stable and secure.
 The area is protected from excessive heat or humidity.
I
6 INSTALLATION