Accessing And Editing I&M Data; Restarting The Web Server - Weidmuller UR67 Series Manual

9.5 Accessing and editing I&M data
▶ Click on I&M data in the navigation bar.
The I&M data is displayed.
Accessing and editing I&M data
▶ Make sure that you are logged in.
▶ Enter the required changes.
▶ Click on Apply to save the change.
Applying a change
Changes are only saved when you click on Apply. Clicking
on Discard will undo all changes.
2599890000/01/03.2020
9 Web server | Accessing and editing I&M data
9.6

Restarting the web server

The module is restarted during the restart pro-
cess! All data which is not protected against
power failure is reset.
▶ Make sure that you are logged in.
▶ Click on ☰ in the menu bar.
▶ Click on Reboot Device.
▶ Confirm by clicking on OK.
Restarting the web server and module
The module and the web server are restarted.
▶ Assign an IP address to the module again in order to
access the web server again.
Manual UR67-PROFINET-V14 38