Updating Firmware - Weidmuller UR67 Series Manual

Switching to Force mode
The web server is now in Force mode, which can be identi-
fied by the red bar. Forced channels can be identified by a
red border.
Display in Force mode
Force mode is terminated when the connection
between the web server and the module is inter-
rupted.
Forcing channels
▶ Click on a channel to force that channel.
The channel is immediately switched to the new status.
Forcing a channel
Terminating/disabling Force mode
▶ Click on Disable force mode in the menu bar.
2599890000/01/03.2020
Force mode will also be terminated when you log out.
Disabling Force mode
The station is put back into the status it was in prior to forced
operations.
9.9

Updating firmware

▶ Click on General information.
▶ Check the installed firmware version.
▶ Download the latest firmware from the Weidmüller
website.
Firmware files have the "bsc" file extension. The file for
UR67-PN-V14 modules, for example, is named FB-PN-IRT-
FULL-0706224-01_00_00-8.bsc.
– The old firmware in the module is overwritten
when a firmware update is performed.
– You cannot access the module via the web
server while the firmware files are being
loaded.
– Make sure that the following points are com-
plied with when the firmware files are being
loaded:
– The power supply must not be interrupted
– The connection to the web server must not
be interrupted
– No changes may be made to the module
▶ Make sure that you are logged in.
▶ To perform a firmware update, click on Update firm-
ware in the menu bar.
Updating firmware
Manual UR67-PROFINET-V14
9 Web server | Updating firmware
40