Commissioning; Requirements; Device Description Files; Commissioning With The Tia Portal - Weidmuller UR67 Series Manual

6

Commissioning

Manipulation of the control unit!
During commissioning, the system may be
manipulated to such an extent that can result
in risks to life and material damage.
▶ Make sure that system components can-
not start up unintentionally!
Hot surface!
The module can become very hot when in
operation.
▶ Allow the module to cool down before
touching it.
The procedure during commissioning depends on which
control unit is being used.
6.1

Requirements

Before you start the commissioning work, the following re-
quirements must be fulfilled.
– The control unit must be in operation.
– The UR67 modules must be completely installed and
wired up.
– The control unit and all UR67 modules must be con-
nected via Ethernet, and a PC must also be connected
using the control unit software.
– The power supply must be switched on.
6.2

Device description files

The naming convention for GSDML files always follows this
pattern: GSDML_V2.33-WI-UR67-yyyymmdd.xml. The date
in the file name (dd.mm.yyyy) indicates the version of the
GSDML file and helps to determine whether you are already
using the latest version.
▶ Download the device description files from the Weid-
müller website.
2599890000/01/03.2020
WARNING!
CAUTION
6.3

Commissioning with the TIA portal

Installing the device description files
▶ Open the following path in the project view: Extras/
Manage general station description files
▶ Select the directory where you have stored the device
description files.
The available files are displayed.
Selecting the GSDML file (TIA portal)
▶ Select the files that you would like to install.
▶ Click on Install.
▶ When the installation is complete, click on Close.
The hardware catalogue is updated automatically. The devic-
es from the current device description file are now listed in
the hardware catalogue.
Connecting a module to the PROFINET network
▶ Start the TIA portal.
▶ Create a new project or open an existing project.
▶ Configure the control unit and the network as usual.
▶ Switch to the network view.
▶ In the hardware catalogue, select the UR67-PN-V14 mod-
ule under PROFINET IO/Additional field devices/IO/
WI UR67.
▶ Double-click on the module in the hardware catalogue.
The module is added to the network view.
▶ Connect the module and the control unit to a
network line.
Manual UR67-PROFINET-V14
6 Commissioning | Requirements
21