Adjustable Parameters - Weidmuller UR67 Series Manual

6.4

Adjustable parameters

Overview of the adjustable parameters
Channel Designation
IP address
Subnet mask
Gateway
Diagnostic alarm
Channel diagnostic alarm
Low voltage bus-/sensor-supply diagnosis
Low voltage actuator-supply diagnosis
Actuator voltage breakdown diagnosis
Restart output after short-circuit
Lock force mode
Lock webserver
Diagnostic alarm POF-transceiver
0 ... 15
3)
Input delay
8 ... 15
1)
0 ... 7 Substitute value
1)
0 ... 15 Channel diagnosis
0 ... 7 Channel diagnosis DO
8 ... 15 Channel diagnosis DI
1) only with UR67-PN-V14-CU-8DIDO-12, UR67-PN-V14-POF-8DIDO-12
2) only with UR67-PN-V14-POF-16DI-12, UR67-PN-V14-POF-8DIDO-12
3) only with UR67-PN-V14-CU-16DI-12, UR67-PN-V14-POF-16DI-12
"IP address" parameter
This parameter is used to set the IP address for the module.
0.0.0.0 ... 255.255.255.255 (default: 0.0.0.0)
The IP address of the module is 0.0.0.0 ... 255.255.255.255.
"Subnet mask" parameter
This parameter is used to set the subnet mask for the
module.
0.0.0.0 ... 255.255.255.255 (default: 0.0.0.0)
The module uses the subnet mask 0.0.0.0 ...
255.255.255.255.
2599890000/01/03.2020
Options
4 digits between 0 and 255
4 digits between 0 and 255
4 digits between 0 and 255
enabled / disabled
enabled / disabled / enable alarm & fault LED / enable only fault LED
enabled / disabled / enable alarm & fault LED / enable only fault LED
enabled / disabled / enable alarm & fault LED / enable only fault LED
enabled / disabled / enable alarm & fault LED / enable only fault LED
automatic / confirmation needed
1)
Force mode unlocked / Force mode locked
Webserver unlocked / Webserver locked
enabled / disabled
2)
no / 0.3 ms / 3 ms / 10 ms / 15 ms / 20 ms
Off / On / Hold last value
disabled / enabled
3)
disabled / enabled
1)
disabled / enabled
1)
"Gateway" parameter
This parameter is used to set the gateway for the module.
0.0.0.0 ... 255.255.255.255 (default: 0.0.0.0)
The module uses the gateway 0.0.0.0 ... 255.255.255.255.
"Diagnostic alarm" parameter
This parameter activates diagnostic alarms.
Enabled (default)
The diagnostic alarms are activated.
Disabled
The diagnostic alarms are deactivated.
Manual UR67-PROFINET-V14
6 Commissioning | Adjustable parameters
Default
0.0.0.0
0.0.0.0
0.0.0.0
enabled
enable alarm & fault LED
enable alarm & fault LED
enable alarm & fault LED
enable alarm & fault LED
confirmation needed
Force mode unlocked
Webserver unlocked
enabled
3 ms
Off
disabled
disabled
disabled
25