9.10 Saving A Service File - Weidmuller UR67 Series Manual

▶ Click on Select firmware file.
▶ Select the firmware file from the storage location on your
computer and click on Open.
▶ Click on Upload file.
The firmware is updated. Once the update is complete, you
will be prompted to restart the module.
▶ Click on Restart.
The module and the web server are restarted.
▶ Assign an IP address to the module again in order to
access the web server again.
If you lose connection to the web server during
the update:
▶ Restart the web server.
▶ Wait until the firmware update is complete.
▶ Restart the web server.
If you cannot start the web server, proceed as fol-
lows:
▶ Delete the temporary browser data (clear the
cache). Deleting only the history is not a suffi-
cient measure in this instance.
▶ Make sure that you have assigned an IP
address to the module.
▶ Restart the web server.
2599890000/01/03.2020

9.10 Saving a service file

In the event of problems and service cases, it may be help-
ful to save the current log data for the module. This data
can provide the service technician with valuable information
about the malfunction. The service file contains data that
has been recorded since the start of operation. Following a
power reset, the log file will be empty and the record will
start again from the beginning.
▶ Click on ☰ in the menu bar.
▶ Click on Save service file.
Saving a service file
The service file is saved on the computer (UR67-PN-V14-CU-
16DI-XYZ_logdata.wmi). You may need to select a storage
location first.
Manual UR67-PROFINET-V14
9 Web server | Saving a service file
41