Configuration; Overview: Configuration; To Access The Most Used Commands - Daikin Altherma 3 R F Installer's Reference Manual

8 Configuration

8.1 Overview: Configuration

8.1.1 To access the most used commands

ERGA04~08DAV3(A) + EHVH/X04+08S18+23DA/DJ3V+6V+9W7
Daikin Altherma 3 R F
4P618947-1 – 2020.03
This chapter describes what you have to do and know to configure the system after
it is installed.
Why
If you do NOT configure the system correctly, it might NOT work as expected. The
configuration influences the following:
▪ The calculations of the software
▪ What you can see on and do with the user interface
How
You can configure the system via the user interface.
▪ First time – Configuration wizard. When you turn ON the user interface for the
first time (via the indoor unit), the configuration wizard starts to help you
configure the system.
▪ Restart the configuration wizard. If the system is already configured, you can
restart the configuration wizard. To restart the configuration wizard, go to
Installer settings > Configuration wizard. To access Installer
settings, see "8.1.1 To access the most used
▪ Afterwards. If necessary, you can make changes to the configuration in the
menu structure or the overview settings.
INFORMATION
When the configuration wizard is finished, the user interface will show an overview
screen and request to confirm. When confirmed, the system will restart and the
home screen will be displayed.
Accessing settings – Legend for tables
You can access the installer settings using two different methods. However, NOT all
settings are accessible via both methods. If so, the corresponding table columns in
this chapter are set to N/A (not applicable).
Accessing settings via the breadcrumb in the home
menu screen or the menu structure. To enable
breadcrumbs, press the button in the home screen.
Accessing settings via the code in the overview field
settings.
See also:
▪ "To access the installer
▪ "8.7 Menu structure: Overview installer
To change the user permission level
You can change the user permission level as follows:
Method
4
settings" [ 108]
settings" [
8 Configuration
|
4
commands" [ 107].
Column in tables
#
For example: [9.1.5.2]
Code
For example: [C-07]
4
179]
Installer reference guide
107