Rep 4.5 Lsu And Cables - Xerox B210 Service Manual

4. Remove the Transfer Roll, Figure 2:
a. Lift the right end of the Transfer Roll and slide the left end out of the bushing,
2.
Figure 2 Removing the Transfer Roll
Replacement
Replacement is the reverse of the removal procedure.
Repairs - Adjustments
REP 4.4, REP 4.5

REP 4.5 LSU and Cables

Figure
Parts List on PL 4.1
Removal
1. Switch off the machine, then disconnect the power cord.
2. Remove the Top Cover,
3. Disconnect two connectors on the LSU, then release the harness from the LSU harness
guide, Figure 1.
Figure 1 LSU Cable Connectors and Wire Harness (Top View)
NOTE: The Flat Cable may be adhered to the LSU. Detach it from the LSU and reinstall it
on the new LSU in the same location.
July 2019
4-16
REP 3.2.
Wire Harness
Connector
Xerox® B210 Service Manual
Initial Release