Xerox B210 Service Manual page 25

03-410 Paper Mismatch at Tray 1 RAP
BSD-ON:BSD 2
The size setting for the Paper Tray does not match the paper size loaded in the tray.
Initial Actions
• Check the media size settings for the tray from the Control Panel.
• Adjust the Paper Tray Guides to match the size of the paper that is loaded into the tray.
• Place the correct size paper into the tray for the tray size setting.
Procedure
1. Switch off the machine, then switch On the power.
2. If the fault persists, install a new Main PWB,
Status Indicator RAPs
03-410 , 03-450
PL 1.1 Item 7.
03-450 Paper Mismatch at Manual Feed Slot
BSD-ON:BSD 1
The size setting for the Manual Feed Slot does not match the paper size loaded.
Initial Actions
• Using Easy Printer Manager, Device Settings, check the media size settings for the tray.
• Adjust the Paper Tray Guides to match the size of the paper that is loaded into the tray.
• Place the correct size paper into the tray for the tray size setting.
Procedure
1. Switch off the machine, then switch On the power.
2. If the fault persists, install a new Main PWB,
July 2019
2-4
PL 1.1 Item 7.
Initial Release
Xerox® B210 Service Manual