Xerox B210 Service Manual page 78

18. Separate the left and right frames from the Middle Frame routing the wires through the
frames as needed.
19. Remove the Pivot Plate, Collar, the Registration Roll Pivot Gear,
istration Roll Drive Gear, Figure 14.
Figure 13 Registration Roll Drive Pivot Gears
Initial Release
Xerox® B210 Service Manual
Figure 13, then the Reg-
Pivot Plate, Collar, Registration Roll
Pivot Gear, and Registration Drive Gear
20. Remove the screw, then remove the Registration Holder,
Screw
Figure 14 Registration Roll Drive Gear and Bushing
July 2019
4-25
Figure 14.
Registration Drive Gear
and Registration Holder
Repairs - Adjustments
REP 4.9