Xerox B210 Service Manual page 81

5. Remove the screw, then remove the Feed and Registration Sensor PWB Cover,
Screw
Figure 2 Feed and Reg Sensors PWB Cover (Bottom View)
6. Release the latch, then remove the Feed and Registration Sensor PWB,
Sensors PWB
Latch
Figure 3 Feed and Registration Sensors PWB (Bottom View)
Repairs - Adjustments
REP 4.10
Figure 2.
Latch
Figure 3.
July 2019
7. Release the actuator from the latch, then remove the Feed and Registration Sensor Actu-
ators, Figure 4:
Feed Sensor Actuator
Reg Sensor Actuator
Latch
Figure 4 Feed and Registration Sensors Actuators (Bottom View)
Note the location of the Spring in the frame cutout for reinstallation,
Figure 5 Actuator Spring Cutouts (Bottom View)
4-28
Spring
Spring
Figure 5.
Spring Cutouts
Initial Release
Xerox® B210 Service Manual