Xerox B210 Service Manual page 85

6. Remove the following items, Figure
a. Remove two Drive Gears.
b. Remove the snap-ring, then remove the Feed Clutch Bushing.
c. Release the latch, rotate the bushing, then remove two Feed Shaft Bushings.
d. Remove the Feed Assembly screw.
Clutch Bushing
Figure 2 Feeder Drives
Repairs - Adjustments
REP 4.13
2:
Screws Drive Gears
Feed Shaft Bushings
7. Remove two screws from the bottom of the Feed Assembly,
Figure 3 Feeder Assembly Bottom Screws (Bottom View)
The Brackets holding the Registration Pinch Rolls and Guide are Spring Loaded. Maintain light
pressure on the Brackets when removing them to avoid damaging or losing parts or personal
injury.
8. Remove two screws, then remove the Registration Pinch Rolls and Paper Guide Brack-
ets, Figure 4.
Figure 4 Registration Pinch Rolls and Paper Guide Brackets
July 2019
4-32
Figure 3.
Screws
CAUTION
Screws
Initial Release
Xerox® B210 Service Manual