Xerox B210 Service Manual page 74

9. Remove the Feed and Registration Sensor PWB Cover,
a. Remove the screw.
b. Release the latch, then remove the cover.
Screw
Figure 3 Feed and Reg Sensors PWB Cover (Bottom View)
Initial Release
Xerox® B210 Service Manual
Figure 3:
Latch
10. Release the latch noting the location of the spring in the frame, then release the Feed
Sensor Actuator, Figure 4.
Feed Sensor Actuator
Latch
Figure 4 Feed Sensor Actuator (Bottom View)
11. On the bottom of the printer, disconnect the drive motor connector, then remove the
ground screw, Figure 5.
Screw
Figure 5 Drive Motor Connector & Screw (Bottom View)
July 2019
4-21
Spring
Connector
Repairs - Adjustments
REP 4.9