Raven SmarTrax Installation Manual page 38

Chapter 5
Wheel Angle Sensor Connection
FIGURE 10.
Disconnect the machine's round WAS connection the front-right side of the tractor.
3.
Machine's WAS Connection Connected to Valve Cable
FIGURE 11.
Install the remaining ends of the valve cable (P/N 115-4001-136) between the machine's WAS connections.
4.
Route the WAS cables to a location where they will avoid damage and secure with plastic cable ties as
5.
necessary.
34
Case IH Puma 115-160/New Holland Non-Delta Series T60x0 SmarTrax™ Installation Manual