Chapter 4
Muffler Clamp Attached to Rod End of Cylinder
FIGURE 2.
Secure the clamp onto the U-bolt using the 5/16" nuts that came with the muffler clamp.
4.
Bolt Inserted Into Rod Mount Bracket
FIGURE 3.
Install the provided M10 x 50 mm bolt (P/N 311-0070-042) in the center hole of the sensor mounting bracket
5.
(P/N 107-0172-030).
Sensor Bracket Installed on Rod End
FIGURE 4.
Secure the sensor mounting bracket onto the muffler clamp using 5/16" lock nuts (P/N 312-1001-169).
6.
26
Case IH Puma 115-160/New Holland Non-Delta Series T60x0 SmarTrax™ Installation Manual