Chapter 5
Node Mounting Plate Installed
FIGURE 2.
Install the node mounting plate (P/N 107-0172-159) against the cab wall (perpendicular to the floor plate of
3.
the cab) using the machine's factory-installed bolts.
Node Cable Connected to the Node
FIGURE 3.
Install the two large, rectangular connectors of the of the node cable (P/N 115-4001-109) into the correct
4.
ports of the SmarTrax node (P/N 063-0173-228), tightening the bolts on the harness connectors to secure
the connections.
30
Case IH Puma 115-160/New Holland Non-Delta Series T60x0 SmarTrax™ Installation Manual
Front of Machine