Start-Up Procedures - Raven SmarTrax Installation Manual

After installing the SmarTrax system on your machine, always follow these

start-up procedures.

• Turn the wheels fully from side to side numerous times to remove air
from the hydraulic system.
Important:
right to left time of approximately 6 seconds. Refer to the
Universal Kit Manual for additional instructions.
Adjust the Pressure Switch to the most responsive setting. Refer to the
Universal Kit Manual for instructions.
S -
TART UP
Time the wheels for a full left to right and
Manual #016-0190-029
C
H A P T E R
P
ROCEDURES
1 3