Raven SmarTrax Installation Manual page 10

Hagie STS 10/12 SmarTrax Installation Manual
Installing Left,
Right and Tank
Hoses
8
Supplied
Tank Hose
Supplied
Excess
Flow Hose
Supplied
Right Steer
Hose
1. Remove original right steer hose (fitting in orbital may need to be
removed for clearance to left steer port).
2. Remove left steer hose. Attach 3/4" run tee to original 90° fitting.
Reattach left steer hose to tee.
3. Attach supplied left steer to 'A' port hose (P/N 214-1000-244) to
branch fitting of tee. Tighten all couplings on left steer line.
4. Install 3/4" run tee onto right steer port and reinstall original right steer
hose.
5. Attach supplied right steer to 'B' port hose (P/N 214-1000-244) to
branch fitting of run tee.
6. Remove original tank line and attach 3/4" run tee to original 90° fitting.
7. Attach supplied 90° 3/4" fitting to run tee branch fitting.
8. Attach original tank hose to run tee.
9. Attach supplied tank hose (P/N 214-1000-246) to branch of run tee
fitting. Tighten all fittings.
Installing Left, Right, and Tank Hoses on Hydraulic Valve
1. Attach tank hose to 'T' port on valve using supplied 9/16" 90° fitting, if
needed.
2. Attach left steer hose to 'A' port on valve. Tighten fittings.
3. Attach right steer hose to "B" port on valve using supplied 9/16" 90°
fitting, if needed.
Temporarily Disconnect for Access
Supplied
Left Steer
Hose
Original Left
Steer Hose