Electrical Safety Precautions - Raven SmarTrax Supplement Installation Manual

Hydraulic
Safety
Precautions
Electrical Safety
Precautions
Important:
to open or work on a hydraulic system with the equipment
running. Care should always be taken when first opening
a system that was previously pressurized.
When disconnecting the hydraulic hoses or when purging is required, be
aware that the hydraulic oil within the machine system may be extremely
hot and under high pressure. Caution must be exercised. Any work carried
out on the hydraulic system must be performed in accordance with the
machine manufacturer's approved maintenance instructions. Raven
Industries recommends that appropriate protective equipment be worn
when working on the hydraulic system.
Objects or materials that are able to bypass the machine's hydraulic
filtration system will adversely reduce performance and possibly damage
the hydraulic valves.
Do not reverse the power leads. Doing so will cause severe damage to the
equipment. Always check to make sure that the power leads are connected
to the right polarity as marked. Ensure that the power cable is the last cable
to be connected.
Hydraulics are under pressure. Never attempt
Manual # 016-0190-072
C
H A P T E R
S
A F E T Y
3