Install Fittings In The Smartrax Valve - Raven SmarTrax Installation Manual

Chapter 3

Install Fittings in the SmarTrax Valve

Before mounting the SmarTrax valve (P/N 063-0131-129) on the machine, install the proper fittings in the
valve. This prepares the valve for installation and simplifies the hose connection process later in the procedure.
Fittings Installed in the SmarTrax Valve
FIGURE 1.
Fitting - -6 ORFS (m) TO -6 SAE O-Ring (M) Straight Adapter
Transducer - 0-3000 PSI Pressure
12
AGCO TerraGator 6203, 8303, 8203, 8204, 8244, 8303, TG7300, TG8300, and TG8400 SmarTrax™ Installation Manual
The appearance of the SmarTrax hydraulic
valve may vary slightly from the images
contained in this manual. However, the fittings,
hose connections, and cable connections
remain the same.
Fitting
NOTICE
Part Number
333-0012-084
422-0000-086
Port
A, B,
P, T,
LSPV,
LS STEER
PS