Chapter 4
Valve Harness Routing
FIGURE 5.
Route the valve harness outside through the access hole in the right-rear corner of the cab and toward the
2.
SmarTrax valve (P/N 063-0131-129).
Plug the PSI connector to the transducer (P/N 422-0000-086) installed in Port PS of the SmarTrax valve.
3.
Valve Harness Connection Ports
FIGURE 6.
RIGHT Connection Port
(not visible in picture)
Connect the DOUBLE BLOCKER 1 connector to Port 1A of the SmarTrax valve.
4.
Connect the DOUBLE BLOCKER 2 connector to Port 1B of the SmarTrax valve.
5.
Connect the LEFT connector to the bottom coil of the stack on the SmarTrax valve.
6.
Connect the RIGHT connector to the top coil of the stack on the SmarTrax valve.
7.
24
AGCO TerraGator 6203, 8303, 8203, 8204, 8244, 8303, TG7300, TG8300, and TG8400 SmarTrax™ Installation Manual
LEFT Connection Port
DOUBLE BLOCKER 1
Connection Port
DOUBLE BLOCKER 2
Connection Port
PSI Connection Port