Raven SmarTrax Installation Manual page 19

Pressure Hose Installed
FIGURE 6.
Disconnect the machine's pressure hose from the steering orbital.
2.
Install a -8 ORFS MM/F swivel run tee adapter fitting (P/N 333-0012-028) in the open port of the steering
3.
orbital.
Connect the machine's pressure hose to the opposite end of the installed tee fitting.
4.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-677) on the 90° end of the installed tee
5.
fitting.
Note:
It may be necessary to install a -8 ORFS M/F 45° swivel elbow fitting (P/N 333-0012-102) on the
end of the installed tee fitting to achieve the connection.
Connect the 45° end of the installed hydraulic hose to the fitting installed in Port T of the SmarTrax valve
6.
(P/N 063-0131-129).
Tank Hose Installed
FIGURE 7.
Installed Tee Fitting
(P/N 333-0012-028)
Installed Hose
(P/N 214-1000-677)
Disconnect the machine's tank hose from the steering orbital.
7.
Install a -8 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-028) in the open port of the steering
8.
orbital.
Connect the machine's tank hose to the opposite end of the installed tee fitting.
9.
Manual No. 016-4001-093 Rev. B
Hydraulic System Installation
Machine's
Pressure Hose
Installed Tee Fitting
(P/N 333-0012-028)
Installed Hose
(P/N 214-1000-677)
Machine's Tank
Hose
15