Table of Contents
Advertisement
Use and Care guide
Installation
• Release the power chord and drain hose from
the securing clip at the rear of the machine.
• Remove the 2 or 4 transportation screws (A) on
the back and remove the 2 or 4 flat washers,
rubber bungs and plastic spacer tubes (B) as
illustrated in figure 1.
• If the washing machine is built-in, unscrew the
3 or 4 transportation screws (A) and remove the
3 or 4 flat washers, rubber bungs and plastic
spacer tubes (B).
• During the removal of the screws occasionally
spacer tubes fall inside the product, these can
be remove by tilting the product forward and
recovering them from the floor or inside the
base of the machine.
• Cover the open transportation screw holes with
the 2 or 4 plastic caps included in the instruction
bag.
WARNING
keep
packaging
children.
Place the corrugated plastic sheet, found on top
of the appliance during the unpacking process,
into the base of the appliance as shown in figure
2 (according to the model, consider version A, B
or C).
materials
away
from
CH
25
Hide quick links:
Advertisement
Table of Contents
