Table of Contents
Advertisement
Timer Switch Control Specifications
The Primex 3 button Timer Switch Control provides the method manage events for both the Elapsed and Code Blue Timer. Elapsed
Timer count down or count up events are triggered manually by a user from the timer switch control buttons. Code Blue Timer
events are triggered by the input of the wired connection to the code blue system and the timer switch control allows a user to
pause a code blue event.
Designed to fit inside a single gang box (not supplied); typically 2 1⁄4 in. x 2 3⁄4 in. x 4 in. (11.45 cm x 6.99 cm x 10.15 cm).
l
Timer Switch Control can simultaneously activate two connected timers for even more accurate event management.
l
Timer Switch Control membrane switch and wall plate clean easily and resist common cleaners and disinfectants. Be sure to
l
test any cleaning solutions on a small area.
Elapsed Timer - Timer Switch Control operating specifications
The timer has three operating modes and a set state. The Timer Switch Control DISPLAY button sets the timer into each mode. The
RESET button sets the timer into its set state, allowing a user to set the start time for a count up or count down event.
Clock Mode
10:45 02
Displays current synchronized
time
Elapsed Timer - Count Mode operating specifications
The Timer Switch Control allows a user to start, stop, pause and reset the timer. When not in a count mode, the timer displays its
synchronized time.
Pressing the
Clock Mode
button...
DISPLAY
Pressing and releasing the DISPLAY button scrolls through the various modes in the following order:
EXIT
1. Clock Mode
2. Count Up Mode
3. Count Down Mode
Count-Up Mode
0.0:00 00
Decimal lit after the 10hr
digit
Count Up Mode
Count-Down Mode
99:59 59.
Decimal lit after the 1 sec
digit
Set State
Set the start time for count
event.
Count Down Mode
8
Advertisement
Table of Contents
