Table of Contents
Advertisement
By moving the appropriate "HR OFFSET" dip switch(s) and the direction (+/-) dip switch, any full-hour time can be displayed. The
"HR OFFSET" switch designates how many hours are offset from the current Transmitter Time Zone.
The clock reads the Hour Offset on start up, when the RESET button is pushed, and each time the clock receives data from the
Transmitter for the offset hours to go into effect.
Set Audible Buzzer (Timer Models Only)
The audible buzzer is only on the count-up and count-down timer function. To enable the buzzer feature, place the OPTIONS -
Buzzer switch (8) in the UP position, as illustrated below.
Set Receive Channel (Programmable Timer Only)
The Programmable Countdown Timer receives its time and schedule information from a Transmitter into which a schedule was
downloaded.
To select a Transmitter, set the RF Channel Switch to the corresponding Transmitter channel number, per the specifications
below. By factory default the PT/TC switch is set to the ON (up) position, which is required for programmable timer operation.
RF Channel Specifications
Transmitter Channel
RF Channel Dial
1
1
2
2
3
3
4
4
5
5
6
6
Transmitter Channel
RF Channel Dial
9
9
10
A
11
B
12
C
13
D
14
E
13
Advertisement
Table of Contents
