Remove The Lcd From The Main Pca Board - Welch Allyn Spot Vital Signs 4400 Service Manual

48 Disassembly and repair
2. Remove the main PCA board from the front housing.
Reassembly notes
Kit item:
• 107184, SRV KIT, MAIN PCA, AND LCD FRAME

Remove the LCD from the main PCA board

1. Carefully separate the LCD flex cable from its connector on the main PCA board by pulling the
cable straight up.
2. Turn over the main PCA board so that the notch on the board faces you.
NOTE Reassembly is the reverse of disassembly.