Hard
disc
Single
Board
Computer
PC1-1
(ETX base Board
Service handbook CP300
8.4
Main Board MK 17-1 & PC1-1 Board
1. Remove the EMC shield by unscrewing the securing screws.
2. The ETX base board processor os positioned on the PC1-1 single processor
board that is located on spacers on the main board (MK17-1). Remove the
securing screws and gently hinge the board as shown. Disconnect the
interconnecting cable assemblies between the boards.
Replacing Major Components
Main Board MK 17-1 & PC1-1 Board
ECG
Board
MK16-2
8
8.4
Main
Board
MK17-1
Page 47