Remove The Device From The Mobile Stand; Remove The Device From The 4400-Dst Desk Stand - Welch Allyn Spot Vital Signs 4400 Service Manual

Service manual

Remove the device from the Mobile stand

1. Disconnect the power cord from the wall.
2. Disconnect the power supply and communication cables from the device.
3. Remove the 4 Phillips screws from the back of the mount.
4. Grasp the device securely and remove the device from the mount.
Reassembly notes

Remove the device from the 4400-DST Desk stand

1. Disconnect the power cord from the wall.
2. Disconnect the power supply and communication cables from the device.
3. Remove the 4 Phillips screws from the back of the mount.
NOTE Remounting the device is the reverse of removal.
Disassembly and repair 37