Makita EB5300TH Repair Manual page 51

Fig. 114
[1]
Fig. 115
1R372
[1]
[2]
Fig. 116
[1]
Fig. 117
[1]
18
By tightening four M5x20 Hex socket head bolts [1],
fasten Oil case [2] to Crankcase.
[2]
19
Temporarily tighten Flange nut M10 [1], then screw
1R372 into the spark plug hole by hand, and then turn
Flywheel [2] until Piston stops.
Remove any grease from the tapered portion of Crankshaft
with parts cleaner.
20
Install Flywheel [1] onto Crankshaft, and then fasten
with Flange nut M10.

Use a torque wrench and Box wrench 14.

Tightening torque: 30-35N･m
21
Fasten Pulley [1] to Crankshaft.

Use a torque wrench and Box wrench 15.

Tightening torque: 9-11N･m
51 / 71
Note
Tips
Tips