Disassembling/Assembling Of Spiral Spring - Makita EB5300TH Repair Manual

4-3-2

Disassembling/Assembling of Spiral spring

Fig. 26
[3]
[2]
Fig. 27
[1]
[2]
3
Apply Makita grease FA No.2 to the whole portion of Spiral spring.
1
Take Reel [2] out of Recoil starter [1].
Remove Reel [2] carefully so that the inside end of Spiral
spring [3] is removed from Recoil starter [1] and placed
in Reel [2].
[1]
2
When Spiral spring [1] is removed for repair or
accidentally pops out of Reel [2], fit it back in place as
follows:
1
2
When rewinding Spiral spring [1], keep pressing it down
[3]
to prevent it from popping out.
13 / 71
Tips
Hook the outer end of the spring into the notch [3] of
Reel [2].
Rewind the spring.
Tips