Engine Section; Disassembling Engine - Makita EB5300TH Repair Manual

4-5

Engine section

4-5-1

Disassembling Engine

The following parts can be disassembled from Engine section without removing Blower section: Cam gear, Muffler, Air
cleaner plate, Carburetor, Insulator, Ignition coil. The following procedure is that the blower section is removed.
1
According to Fig. 13 and Fig. 14, remove Recoil starter and Engine cover complete.
Fig. 60
[2]
[1]
Fig. 61
1R016-A
[1]
Fig. 62
[1]
2
Remove M8x12 Hex bolt (drain bolt) [1] to drain Oil
case.
Be careful not to lose Gasket (washer) [2].
3
Remove three M6x20 Hex socket head bolts [1] to
remove Muffler [2] and Muffler gasket [3].
Use a ratchet wrench, a bit adapter and 1R016-A to
loosen the bolt because it is a bolt with high strength
thread locking patch.
[2] [3]
4
Remove Exhaust port spacer [1] from Cylinder.
28 / 71
Note
Note