Makita EB5300TH Repair Manual page 25

Fig. 56
[1]
[3]
Fig. 57
1R402(-A)
1R402-B
10
Remove M5x25 Hex socket head bolt [1] to remove
Throttle lever [2]. In this step, Wave washer 20 [3] is
also removed.
[2]
11
Using 1R402-A, make sure that there is conduction
when Control lever is set to "O", and that there is no
conduction when Control lever is set to "I".
By attaching 1R402-B to the tip of each probe of
1R402-A, you can do the check easily, with clipping the
straight terminals with the probes.
25 / 71
Tips