Makita EB5300TH Repair Manual page 40

Fig. 88
[2]
[1]
[3]
Fig. 89
[4]
[3]
Fig. 90
[1]
14
Remove four M5x20 Hex socket head bolt [1] and
four M6x20 Hex socket head bolt [2] to separate
Crankcase [3] from Cylinder block.
Crankcase [3] and Cylinder block [4] are securely
joined together with liquid gasket. So, after removing
the bolts, insert a slotted screwdriver into the gap of
the mating face, and then turn the screwdriver to pry
off Crankcase [3] from Cylinder block [4].
15
Pull off the assembly of Crankshaft and Piston
from Cylinder block [1].
40 / 71
Tips