Fig. 149
[1]
[3]
Fig. 150
[2]
[1]
[3]
Fig. 151
[2]
[4]
Fig. 152
5
[5]
[4]
Push each Tube securely onto the nipple of each part until
it stops.
[2]
6
[3]
[3]
Fit the two grooves of Engine cover complete [2] onto
Insulator [4].
7
Push Carburetor cover [1] until it clicks in place.
[1]
62 / 71
With 1R311, connect Fuel tube 3-85 (transparent) [1]
and Fuel tube 3-370 (transparent) [2] to Primer pump
[3], and Fuel tube 3-370 (black) [4] to Carburetor [5].
Note
Put Plug cover [1] and Engine cover complete [2] on the
engine section, and then fasten them with 5x20 Tapping
screw (5 pcs) [3] magnetized with 1R288.
Note
Install Carburetor cover [1] onto Carburetor.
Note