Mitsubishi Electric MELSERVO-J5 Series User Manual page 52

Program operation
Positioning operation using multiple operation patterns can be performed without a controller. Perform this operation on the
Program Operation screen of MR Configurator2. For details, refer to Help of MR Configurator2.
1.
Open the Program Operation screen of MR Configurator2.
(1)
(2)
No. Item
(1) Program display
(2) Operation
(3) Repeat execution
2.
Clicking "Program Edit" in the program operation screen opens the Program Edit screen.
Input the program and click "OK". For program commands, refer to Help of MR Configurator2.
4 STARTUP
50
4.5 Test operation
Screen operation
Displays the program. To edit the display item, click "Program Edit".
The following operations can be performed: operation start, pause, stop, and forced stop. Clicking "Operation
Start" starts the operation.
Displays the number of execution times. Selecting "Aging function" enables the repeated operation of the
operation program.
(3)