Using Software - Intamsys FUNMAT PRO User Manual

USING SOFTWARE

Step 1: Load STL.
Step 2: Edit STL
Make sure your object is laid flat on the platform.
You can use the Rotate, Scale and Mirror buttons in
the bottom-left corner to modify your objects. The
viewing button is located in the top-right corner. You
can change the viewing mode to get a better view of
the objects.
Step 3: Print STL
After you finish modifying your file, the next step is
to pick the profile setting based on your
requirements. Fast print provides a relatively rough
quality but requires less time to print. Normal, high,
and ulti will provide better and better quality but
have slower and slower printing speeds. You can also
choose the specific type of material you want to
print, the nozzle size, support type, and platform
adhesion type If you would like to customize the
print settings or if you have special requirements for
60