Remove Print & Clean Support - Intamsys FUNMAT PRO User Manual

Remove Print & Clean Support
After the object has been printed, wait for a few
minutes to let the chamber and platform cool down.
Be careful with hot objects such as the chamber,
platform, and nozzle. They may still be very hot. Use
the shovel provided to remove the model.
Depending on your settings, you may need to take a
raft, brim, or support off the model. Use the cutting
pliers and the tweezers provided to do so.
Additionally, if you have particular requirements for
the surface quality or the appearance of the printed
object, you can use a metal file or sand paper to
smooth it.
40