SAFETY MESSAGES
Movement Safety
The machine is very heavy, so when unpacking the machine or moving the machine form one
location to another, always use another person's assistance. Additionally, keep the machine on a
flat ground with enough space on all sides to operate the machine without any difficulty.
Electrical Safety
The power supply meets all CE mark regulations and is protected against short-circuits, overloading,
over voltage, and overheating. Make sure you only use the power supply cable you received from
INTAMSYS.
Mechanical Safety
The machine has many moving parts, but the stepper motors do not have enough power to cause
serious injuries. Still, we advise you to only reach into the machine when it is turned off.
High Temperature Safety
FUNMAT PRO comes with an all-metal nozzle, high-temperature build plate, and heated chamber.
When printing functional materials with a chamber temperature of up to 60℃, the heat transmits
to the outer frame, so we advise you not to touch the machine during the printing process. The
nozzle can reach temperatures of up to 270℃, and the heat bed can reach temperature up to160℃
during the printing process. Thus, we strongly advise you not to touch the nozzle & heat bed when
the printer is running.
Additionally, let the printer cool down before opening the front door or the top door of the
machine.
7
Need help?
Do you have a question about the FUNMAT PRO and is the answer not in the manual?