Table of Contents
Advertisement
Bed Leveling
"BUILDPLATE"
Step1:
Click
Step2:
Have the calibration card with thickness of 0.2mm ready and start the bed leveling process.
Leveling Card
Step3:
Turn the rotate button to raise the platform, place the leveling card between the platform and the nozzle until
you feel a little resistance when you gently sliding the card.
.
For printing materials which heating chamber is needed, please firstly set the chamber to the printing
NOTE:
chamber temperature and keep it for at least 50min before leveling. And do bed leveling at this high
Install Software
After successfully setting up the printer, locate the SD card and install the INTAM-SUITE software on your computer. It is
only for Windows.
Camera Guide
To connect the camera please follow the Camera User manual in your box. You can install the App of the camera on your
smartphone or computer.
on the display of the printer.
.
3
temperature.
Advertisement
Table of Contents
Need help?
Do you have a question about the FUNMAT PRO and is the answer not in the manual?