Step
4:Please move the extruder to the right
front position . Please rotate 2mm wrench to make
sure the pointer approaches "0"(tolerance: -
10um~+10um).The wrench is used to raise or drop
the build plate( anti-clockwise to raise and
clockwise to drop).
Step
5:Please move the extruder back to the
center position. Please repeat Step 4 to make sure
the pointer approaches "0"(tolerance: -
10um~+10um).
Step
6:Please repeat step 4&5 several times for
more precise calibration.
30
Need help?
Do you have a question about the FUNMAT PRO and is the answer not in the manual?