Intamsys FUNMAT PRO User Manual page 64

Amorphous
Anisotropic
B
Bed
Binder Jetting
Biopolymer
Blender
Bridges
Brim
Build Plate
Build Platform
Build Time
Build Volume
BuildTAK
C
CAD / CAM
CAE
Without a clearly defined shape or form.
Object with physical properties that are different in different
directions.
Platform on which material gets extruded.
A 3D Printing process where binder is jetted after each layer to glue
it to the next layer.
Polymers produced by living organisms. Since they are polymers,
biopolymers contain monomeric units that are covalently bonded to
form larger structures.
An open source 3D modeling software.
Printing horizontal layers in the air without support.To achieve good
quality for bridges, it is recommend to reduce printing speed and
printing temperature.
Attached to a model and extends outward. Brims typically have
several outlines and may be a few layers tall. Brims are often used to
stabilize small parts of a model, such as legs of a table, because
brims help these areas stay connected to the print bed
The platform on which material is deposited layer by layer.
Same as build plate.
Time it takes to print the object as per the parameters defined in
slicer software.
Build volume = Printer Length x Printer Width x Printer Height.
A sheet that is placed on the build plate before extruding the
material to avoid warping of printed objects.
Computer Aided Design / Computer Aided Machining.
Computer-aided engineering is the broad usage of computer
software to aid in engineering analysis tasks like Finite Element
Analysis.
64