Cleaning Glass Plate - Intamsys FUNMAT PRO User Manual

CLEANING GLASS PLATE

After printing repeatedly, excess glue may get
deposited on the build plate. This causes uneven
print surface that will negatively affect future prints.
To prevent this, the glass plate needs to be cleaned
regularly.
Below are the steps for cleaning the glass plate.
Step 1: To lower the build plate, select "Axis," then
"XYZ," and then press and hold either "z+" or
."
Step 2: Manually move the nozzle to the back of
the machine. Then, take the glass plate from the build
plate.
Step 3: Clean the glass plate with hot water and
dry it with a cloth. If necessary, you can also use
some soap to clean it.
42