Filament Care - Intamsys FUNMAT PRO User Manual

In general, we suggest you lubricate the X and Y
axes after 200-300 hours of printing.We can't
ship the lubricating grease for logistical reasons.
So, we suggest you to buy the machine grease by
yourself. We recommend you use lithium-based
grease onto the axis guide rails

Filament care

Keep your filament in a sealed bag when not in
use. Exposing the filament to air will lead to the
filament absorbing moisture and swelling. When
printing, keep the filament in an air-tight box if not
mounted on the machine. Ensure the filament does
not become loose around the spool; loose filament
will lead to tangling, breaking, or filament
jamming.
46