Motors Off; Settings; Nozzle Temperature; Build Plate Temperature - Intamsys FUNMAT PRO User Manual

Motors Off

Press "Motors Off" to power off the stepper
motors.

Settings

In this settings section, you have the option to
modify the temperature of the nozzle, the build
plate, and the chamber. You can also change the
language and modify a few other parameters.

Nozzle Temperature

Increase or decrease the nozzle temperature. On
the screen, the target temperature and actual
temperature are displayed. You can modify the
target temperature by rotating the dial. You can
also long press the (+) or (-) buttons to modify the
temperature.

Build Plate Temperature

Increase or decrease build plate temperature. On
the screen, you can find the target temperature and
actual temperature. You can modify the target
temperature by pressing the (+) or / (-) buttons.
38