Xyz; Retraction; Extruder - Intamsys FUNMAT PRO User Manual

Select "Home" to return the X, Y, and Z coordinates
to their home positions.

XYZ

Select "X Y Z" to move the X, Y, and Z coordinates
manually. You can press the buttons or use the dial
to move the nozzle and build plate to the desired
location.

Retraction

This section is used to set the retraction distance
and speed. Retraction is used to pull the filament
back when the hotend is moving to prevent
stringing.

Extruder

This section is used to move the filament up or
down.This means to move the extruder motor
rotate by clockwise or anticlockwise.
37